Geometry.Net - the online learning center
Home  - Pure_And_Applied_Math - Industrial Math

e99.com Bookstore
  
Images 
Newsgroups
Page 2     21-40 of 97    Back | 1  | 2  | 3  | 4  | 5  | Next 20

         Industrial Math:     more books (100)
  1. Industrial Mathematics : The 1998 CRSC Workshop
  2. Mechanical Engineering Craft Theory: v. 2 (Longman Industrial Crafts Series) by R.L. Timings, O. Alabi, 1984-05-29
  3. Robust Nonlinear Control of Industrial Evaporation Systems, Implementation of Differential Geometric (Chemical Engineering) by L. C. To, Moses O. Tade, 1999-02
  4. Complex Flows in Industrial Processes (Modeling and Simulation in Science, Engineering and Technology)
  5. Industrial Water Pollution Control by Jr.,W. Eckenfelder, 1999-09-29
  6. Industrial Electronics (Basic Skills in Electricity & Electronics) by Frank D. Petruzella, 1995-02-24
  7. Case Studies in Industrial Mathematics (European Consortium for Mathematics in Industry)
  8. Engineering Economics Analysis for Evaluation of Alternatives (Industrial Engineering) by Ira H. Kleinfeld, 1992-12-15
  9. NUMIFORM 2010: Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz ... / Materials Physics and Applications)
  10. Math for the Technician (Indoor Environment Technician's Library) by Leo A. Meyer, 2005-01-01
  11. Fourth International Symposium on Domain Decomposition Methods for Partial Differential Equations (Proceedings in Applied Mathematics) by International Symposium on Domain Decomposition Methods for Partial di, Roland Glowinski, 1991-06
  12. Computational Information Retrieval (Proceedings in Applied Mathematics) by N. C.) Computational Information Retrieval Conference (2000 Raleigh, Michael W. Berry, 2001-08-01
  13. Geophysical Inversion (Siam Proceedings Series) by Tex.) Geophysical Inversion Workshop (1989 Houston, J. Bee Bednar, et all 1992-06
  14. Engineering Economy (McGraw-Hill Series in Industrial Engineering and Management) by Leland Blank, Anthony Tarquin, 2004-12-16

21. Deca Scientific Calculator, Industrial Math
Deca Scientific Calculator, industrial math. industrial math FORMULAS EQUATIONS. Math, it’s all relative Pi = 3.14 3.14 ÷ 4
http://www.angelfire.com/pa/baconbacon/page3.html

22. Industrial Math Faculty
industrial math Faculty. Back to Home Page.Melnikov Powell Sinkala Worsey Zijlstra.
http://www.mtsu.edu/~mathsci/indmath/faculty.html
Industrial Math Faculty
Back to Home Page
Melnikov

Powell

Sinkala

Worsey
...
Zijlstra

23. Industrial Math - Math 5481-2
equations. I am the TA for the industrial math course, a course Ireally enjoyed taking because of its unique characteristics. I
http://www.math.umn.edu/~rios/IM/

24. M.S. Thesis: S. Rudnaya, Industrial Math, U Of MN
Research supported by the Minnesota Center for industrial mathematics (MCIM). contactus at mcim@math.umn.edu for more information/or contact the School of
http://www.math.umn.edu/mcim/theses/rudnayaphd.html
Svetlana Rudnaya
ABSTRACT
The problem we study arose in an industrial application. For an optical system, it is desired to produce a certain light intensity pattern on an image plan. This can be realized by using a Diffractive Optics Element (DOE) placed between the light source and the image plane. A DOE consists of an opaque screen with an aperture covered by a thin transparent film. It is placed far from the light source, so that an incoming light can be assumed to propagate as a plane wave. As the light goes through the DOE, its properties (the phase and/or the amplitude) are changed according to the principles of optics. The modified outgoing light, which is not a plan wave anymore, produces a certain intensity pattern on the image plan in the near field of the DOE. The problem of determining the intensity pattern given a complete information about the DOE is called a Forward problem Of our particular interest is an optimal design of the DOE, also called an Inverse problem . Given geometrical and physical parameters of the system and a target pattern, we would like to determine the features, such as a thickness variation, of the DOE that produces an intensity pattern that is as close to the target one as possible. The Inverse problem can be complicated by specific constraints coming from manufacturing capabilities. For example, the thickness of the film may be restricted to be piecewise constant, satisfy a given resolution, and take on only one of L (

25. Industrial Math/Stat Jobs Posted Recently
industrial math/Stat Positions Posted industrial mathematics Masters ProgramDepartment of Mathematics and Statistics Utah State University.
http://www.math.usu.edu/~ims/jobs.html
Industrial Math/Stat Positions Posted
Industrial Mathematics Masters Program
Department of Mathematics and Statistics
Utah State University
When a job advertisement that might fit one of our graduates comes to our attention we post it here. The list is not comprehensive by any means, nor necessarily current. But by looking at it you can get an idea of what sorts of jobs are around in industrial math/stat. Sept. 6th, 2002 Sept. 30th, 2002

26. Industrial Math Conference
on Industrial and Interdisciplinary Mathematics. Friday, March 1 and Saturday, March2, 2002 Eccles Conference Center Room 307/309. Logan, Utah. email stone@math.
http://www.math.usu.edu/~ims/conference/
/* Top Navigational Bar III (By BrotherCake @ cake@brothercake.net) Permission granted/modified by Dynamicdrive.com to include script in archive For this and 100's more DHTML scripts, visit http://www.dynamicdrive.com */ * New * See Photo Highlights of the Conference! First Annual
Intermountain/Southwest
Conference on
Industrial and Interdisciplinary
Mathematics
Friday, March 1 and
Saturday, March 2, 2002
Eccles Conference Center Room 307/309 Logan, Utah
email: stone@math.usu.edu Fax: (435) 797-1822 Phone: (435) 797-2809

27. CAIMS•SCMAI Home Page
Development and maintenance of Applied and industrial mathematics in Canada. About the society, news Category Science Math Organizations......Canadian Applied and industrial mathematics Society Société Canadiennede Mathématiques Appliquées et Industrielles English Français.
http://www.caims.ca/
Canadian Applied and Industrial Mathematics Society
English -
INFORMATION
About the Society Call for Nominations: Research Prize Doctoral Dissertation Award 2003 Election Board of Directors ... Joint CAIMS*SCMAI/SIAM 2003 Meeting in Montreal Publications Upcoming Meetings and Workshops Related Links ... Employment Opportunities MEMBERSHIP AWARDS Benefits Doctoral Dissertation Award Application Form Arthur Beaumont Distinguished Service Award CAIMS*SCMAI Members'
subscription rate for CAMQ is now $40/year. CAIMS*SCMAI Research Prize
To be notified when this page is updated: Enter Your E-Mail Address:
Select Your Platform: Macintosh Windows 95 Windows NT Windows 3.x Be OS/2 Unix Linux DOS Other
Please forward your comments and submissions to caims@caims.ca.
Some modifications by S.A. Campbell.

28. Industrial Math: Evaluation Of Industrial Math Week 2000 & Preceding Course
Title (character). EVALUATION industrial math Week IMW2000. Preceding oneweek courseMath Modelling Industrial Problems. EPAM-project. industrial math. Place.
http://www.math.utwente.nl/epam/KNAW-eval IMW2000.htm
KNAW-EPAM Activity Report
Activity
Title (character) EVALUATION Industrial Math Week IMW2000 Preceding one-week course: Math Modelling Industrial Problems EPAM-project
Industrial Math
Place ITB-P4M Period/Date July 3—July 14, 2000 Reporting Name,function, date Prof. R. Sembiring, evaluator ITB Prof. E. van Groesen evaluator, UTwente July 14, 2000 Staff Netherlands: Dr. B. van de Fliert (Utwente), Dr. S. Rienstra (TU Eindhoven) Indonesia (ITB): Dr. E. Soewono, Dr. L. Wiryanto, Dr. Kuntjoro, a.o..; (Dr. Andonowati) Others: India: Prof. Kannan M. Moudgalya; Australia: Prof. Neville Fowkes Summary Evaluation has been done: Discussion-meeting with 5 coordinators of IMW, 3 lecturers of course evaluation forms filled out by participants and personal discussions with participants. Course: 24 participants had been selected from 32 applicants. Topics were chosen to prepare for the IMW, taking well into account the expected different level of participants. Practically all participants could profit from the larger part of the course, which showed itself in their activity during IMW. Six participants were identified who performed above average and were offered ‘awards’ in the form of possibilities to continue research for some time at UT, TUE or P4M. 120 participants were registered, approximately half of them participated actively. The difficult process of acquisition and selection of problems, and preparation to a reasonable extent, was well executed in collaboration of all coordinators, in particular Dr. Andonowati and Soewono. The intro-presentations, by representatives from industry, led to problem-groups of very different size;

29. AACK3029 - Industrial Math
AACK3029 industrial math Instructor K. Eitzman (keitzman@southeast.edu).Course beginning and ending dates About this course If
http://www.online.southeast.edu/domino/html/coursepa.nsf/dd5cab6801f172358525647

30. Industrial Math Student Projects
MATH 8700 industrial mathematics Student Projects. Spring, 2000. G. Awanou,UGA Department of Mathematics. Fluid Flow In A Porous Medium.
http://www.math.uga.edu/~gard/indmathproj.html
MATH 8700 Industrial Mathematics Student Projects
Spring, 2000
  • G. Awanou, UGA Department of Mathematics. Fluid Flow In A Porous Medium. This project formulates a free-boundary problem to model a layered blood sample flow on a slide to be subjected to chemical diagnostic testing. It is suggested by a problem in vol. 8 of the IMA series on Industrial Mathematics.
  • T. Barron, UGA Department of Mathematics Education. Saving Wildlife: Changing Force To Increase Water Supply. This project analyzes a proposed structural modification of a stream diversion channel supplying a fish hatchery in NE Georgia.
  • G. Baramidze, UGA Department of Mathematics. Using Cubic Tensor-Product Splines In Animation Construction. This project assesses the usefulness of minimizing energy functional time-interpolation of cubic tensor-product splines for digital animation of multi-dimensional data.
  • V. Gorokhovski, UGA Department of Mathematics. Dimensionless Sensitivity Analysis Of Subsurface Flow And Transport Model. This project obtains a dimensionless form for a multi-parameter environmental subsurface flow and contaminant transport model and computes the sensitivities of the contaminant concentration for the three dimensionless parameters.
  • R. Kandala, UGA Department of Food Science.
  • 31. UWM Math: MS In Industrial Math
    of these semesters a student can register for up to 3 Master's Thesis 600790 creditsor Industrial Internship 600 There are no equivalent courses in the Math.
    http://www.uwm.edu/Dept/Math/Teaching/indmath/indmath2.html
    Master's Degree in Industrial Mathematics
    Department of Mathematical Sciences
    University of Wisconsin-Milwaukee
    General Description The Master's Degree in Industrial Mathematics requires at least 36 classroom credits, including a thesis or final project based on an industrial internship. The objective is to teach students the fundamentals of applied mathematics in areas of classical and numerical analysis, differential equations and dynamical systems, and probability and statistics. At the same time, the connection of these fields to modeling of physical, biological, and engineering phenomena will be stressed. The latter is to be achieved by requiring credits outside the mathematics department. The students are to obtain practical experience of modeling and formulating a problem in the language of mathematics during an internship at a local company. The solution to such a problem will form the basis for the final project or thesis. Full time students, without deficiencies, could be expected to complete the program in two years. Admission Policy The program will admit students with bachelor's degrees in any area of mathematical sciences, computer science, physics, engineering, or related field. At least 6 credits in mathematics courses requiring calculus, and some knowledge of a higher level programming language are required for admission.

    32. UWM Math: Industrial Math Announcement
    The industrial organization will have the use of a mathematically sophisticated studentwho He/she must have taken calculus and two more math courses requiring
    http://www.uwm.edu/Dept/Math/Teaching/indmath/indmath.html
    Announcing
    MS in Mathematics, the Industrial Option
    A new Master's Degree option at UWM
    The Program
    This new Master's degree program will train students to attack mathematics problems which arise in the real world. This program is separate from the standard graduate programs in mathematics and emphasizes applied mathematics and statistics courses. It requires students to become familiar with another area of technology or science and requires them to serve an internship in industry and to do a project related to that internship.
    The faculty
    The program will be supervised by faculty of the mathematics department with assistance from individuals in engineering and industry. The department has faculty actively engaged in research in areas such as mathematical models, statistics and probability, numerical analysis and optimization, and dynamical systems.
    What it offers the student
    The student will have the opportunity to learn portions of mathematics not covered in the standard courses, but which are useful for applications. He/she will acquire skills which lead to better employment opportunities after graduation, and will get an appreciation for the problems confronted by researchers in industry.
    What it offers industry
    The industrial organization will have the use of a mathematically sophisticated student who can help formulate and perhaps solve problems arising in the organization. They also will be able to call upon faculty with widespread skills to aid in solving these problems.

    33. Industrial Math Group, Control Theory
    Systems and Control.
    http://www.mathematik.uni-kl.de/~zerz/control/en/Welcome2.html
    Systems and Control
    Industrial Mathematics
    Department of Mathematics
    University of Kaiserslautern
    Staff ...
    News
    This page is maintained by Eva Zerz
    Last updated on January 24, 2003.

    34. Seminar Industrial Math. And Math. Modeling
    PrevNextIndex Seminar industrial math. and Math. Modeling. SubjectSeminar industrial math. and Math. Modeling; From
    http://www.csc.fi/math_topics/Mail/NANET97-1/msg00181.html
    [Prev] [Next] [Index]
    Seminar Industrial Math. and Math. Modeling
    • Subject : Seminar Industrial Math. and Math. Modeling From prikryl@beba.cesnet.cz Date : Tue, 25 Feb 1997 13:50:29 +0100 (MET)
    First announcement Department of Mathematics, University of West Bohemia in Pilsen, Mathematical Institute of the Academy of Sciences of Czech Republic, Union of Czech Mathematicians and Physicist, Pilsen organize the third seminar INDUSTRIAL MATHEMATICS AND MATHEMATICAL MODELLING - IMAMM'97 http://deimos.zcu.cz/konference/IMAMM/

    35. Industrial Math
    Trigonometry. industrial math Core. If it has been awhile since your last math course,brush up on the basic skills needed to be successful in today's workforce.
    http://www.onboces.org/Continuing_Ed/industrial_math.htm

    36. Course Title: Industrial Math & Statistical Process Control
    Course Title industrial math Statistical Process Control Course Type TailoredTarget Audience Production Operators and Supervisors Summary of Course
    http://www.lbcc.cc.or.us/swpc/indmath.html

    Course Title:
    Course Type:
    Tailored
    Target Audience:
    Production Operators and Supervisors
    Summary of Course Contents:
    This is a sixty-three hour training is focused on the application of statistical process control and related mathematical concepts to quality improvement strategies in the secondary wood products manufacturing industry. Location where course conducted:
    Number of times conducted:
    Recommended # of students/class:
    Total Number of students receiving this course:
    Total Number of Companies represented (unduplicated):
    Comments from participants:
    Need to spend more time on math parts - pace too fast - most of us haven't used math in 20+ years and most of this we have never used - all in all, very interesting; Learned a lot and relearned even more; Would like to see the course done more in depth; Learned a lot - will use this instruction in the future; Class needs to be divided based on ability and paced according to that.

    37. Course Title: Industrial Math & Statistical Process Control Level II
    Course Title industrial math Statistical Process Control Level II Course TypeTailored Target Audience Process Operators, Supervisors and Quality
    http://www.lbcc.cc.or.us/swpc/indmathII.html

    Course Title:
    Course Type:
    Tailored
    Target Audience:
    Process Operators, Supervisors and Quality Engineers
    Summary of Course Contents:
    This is a twenty-one hour training course focused on the foundations of contemporary manufacturing process management through the applications of statistical process control. Level II builds on the statistical tools and fundamental mathematics concepts of level I. Practical models are used to associate mathematics theory and concepts with statistical process control. Location where course conducted: States Industries, Components Division, Eugene, OR
    Number of times conducted:
    Recommended # of students/class:
    Total Number of students receiving this course:
    Total Number of Companies represented (unduplicated):
    Comments from participants:
    Did not feel pressured to perform; Thought you cared for the individual; Not enough information absorbed; Would like to take the same class again; Great class; Overall, an excellent class; I thought the time spent on the basic math was too long; The color tiles seemed like a waste of time.

    38. INDUSTRIAL MATH 1
    industrial units of measure, such as those used for pressure, flow, velocity,concentration, and volume. industrial math 1. Overview.
    http://www.but.be/wln/Chemical Operations/OTIM1.html
    INDUSTRIAL MATH 1
    Overview The purpose of this unit, the first of a two-unit series, is to review the concepts of basic math and algebra and to describe common industrial units of measure, such as those used for pressure, flow, velocity, concentration, and volume. This unit also describes how calculators can be used to solve industrial mathematics problems.
    Objectives
    • Perform basic mathematical calculations, including fractions, decimals, and percents. Perform basic algebra and algebraic formula calculations. Describe ratios and proportions. Describe units of measure and formulas commonly used in industry. Demonstrate the use of calculators in solving process-related problems.
    Subjects Addition
    • Number line Base 10 number system Addition in vertical columns Checking addition
    Subtraction
    • Principles of subtraction Subtraction in vertical columns Checking subtraction Practical applications
    Multiplication
    • Principles of multiplication Multiplication tables Multiplication in vertical columns Multiplication shortcut Practical applications Powers of numbers Roots of numbers
    Division
    • Principles of division Short division Trial divisions with possible answers Long division Practical applications Dividing by multiples of 10 Division shortcut with powers of numbers Checking division and multiplication Combined operations Averaging Performing basic operations with signed numbers
    Fractions
    • Meanings of fractions Adding and subtracting fractions Finding a common denominator Finding the lowest common denominator (LCD)
      - procedure for finding the LCD

    39. INDUSTRIAL MATH 2
    This video builds on the mathematical concepts presented in industrial math 1 bypresenting specific examples of solving process problems. industrial math 2.
    http://www.but.be/wln/Chemical Operations/OTIM2.html
    INDUSTRIAL MATH 2
    Overview The purpose of this unit is to build on the mathematical concepts presented in Industrial Math 1 by presenting specific examples of solving process problems by using math principles. Emphasis is placed on reading process indications and using basic math steps to solve process-related problems.
    Objectives
    • Identify and describe typical graphs. Read indications from recorder charts. Define the term trend and describe the value of trends in the operation of process systems. Solve process-related problems.
    Subjects Introduction to algebra
    • Algebraic operations Equations
    Equations
    • Working with equations Rates and proportions
    Using algebra
    • Isolating an unknown Distribution Factoring
    Formulas - part 1
    • Area formulas Volume formulas
    Formulas - part 2
    • Volumetric flow rate formulas Formulas for simultaneous fill and drain Using a calculator
    Charts and graphs
    • Charts
      - strip charts
      - circular charts Graphs
      - "x, y" graphs
      - plotting a graph Bar graphs Pie graphs Nomographs
    Trends
    • Types of trends Trend detection Trend analysis Plotting expected trends

    40. INDUSTRIAL WORKSHOP '99
    industrial mathEMATICS MODELING WORKSHOP FOR GRADUATE STUDENTS. Center for Researchin Scientific Computation North Carolina State University Raleigh, NC 27695
    http://www.ncsu.edu/crsc/events/IMMWinfo.html
    INDUSTRIAL MATHEMATICS
    MODELING WORKSHOP
    FOR
    GRADUATE STUDENTS
    Center for Research in Scientific Computation North Carolina State University Raleigh, NC 27695 INFORMATION ABOUT PREVIOUS WORKSHOPS
    Workshop '95 August 7-16, 1995, North Carolina State University
    Workshop '96 August 5-13, 1996, North Carolina State University
    Workshop '97 August 4-12, 1997, North Carolina State University
    Workshop '98 July 27 - August 4, 1998, North Carolina State University
    Below are links to papers resulting from the 1998 Workshop projects.
  • CRSC-TR99-06
  • MODELING ASPECTS CONCERNING THUNDER ACTUATORS M. Capozzoli, J. Gopalakrishnan, K. Hogan, J. Massad, T. Tokarchik, S. Wilmarth, H.T. Banks, K.M. Mossi and R.C. Smith January, 1999 PostScript file Adobe PDF file
  • CRSC-TR99-16
  • 1998 INDUSTRIAL MATHEMATICS MODELING WORKSHOP FOR GRADUATE STUDENTS P.A. Gremaud, Z. Li, R.C. Smith and H.T. Tran

    Page 2     21-40 of 97    Back | 1  | 2  | 3  | 4  | 5  | Next 20

    free hit counter